Daily maintenance method of CNC steel cage welding machine

In the process of using the cage seam welding machine, although it brings more convenience to our processing work, if we ignore its maintenance, it will also cause the performance of the seam welding machine to decline and accelerate the aging of the equipment. Therefore, the maintenance of the CNC steel cage welding machine needs to attract our attention. In the following article, our CNC steel cage welding machine manufacturer will share some correct maintenance methods for you . Please read it together.

◎The operator must be trained by the technical personnel of the CNC steel cage welding machine manufacturer to operate the equipment, and fully understand the performance of the equipment.

◎Before use, the CNC steel cage welding machine should be fully checked to see whether the connection of each line is normal, whether the bolts and nuts are loose, whether the worktable and the CNC steel cage welding machine are kept level, etc. At the same time, before processing, the machine should be idle for a few minutes, and The bent end of the steel bar can be inserted into the fixed gap of the turntable.

◎During the operation of the CNC steel cage welding machine, it is strictly forbidden to cover the electrical parts, and the heat dissipation must be kept smooth.

◎The manufacturer of the cage seam welding machine needs to check the lubrication of the moving parts of the seam welding machine every day, especially the reducing slide, electrode guide rod and reducing screw, which need to be lubricated every day.

◎1 to 2 months, the oil quantity of the reducer and hydraulic station should be checked regularly. If there is any shortage, it should be added. If there is oil leakage, it should be repaired in time.

◎The manufacturer of the CNC steel cage welding machine should regularly use a paint brush or a breeze blower to remove the dust in the electrical cabinet every week, and keep the electrical cabinet clean, otherwise it may cause an accident of short-circuit and burnout of the equipment.

◎It is strictly forbidden to use water or compressed air to wash or blow soot on electrical equipment. Water is strictly prohibited in the electric control cabinet to ensure that the electric control cabinet is not exposed to rain.

◎It is strictly forbidden for non-operators to operate the equipment without authorization (such as the unauthorized modification of built-in parameters such as inverters and touch screens), otherwise it is very easy to cause equipment damage or accidents that harm the safety of others.

◎For the maintenance of the supporting equipment, such as the hydraulic station, please refer to the product manual of the CNC steel cage welding machine manufacturer (to prevent water ingress, disassemble the corresponding parts to prevent the entry of dust and other dirt).

◎At the end of each day’s work, the power should be cut off. It is recommended to check and clean up the steel cage seam welding machine.