The power trowel is also called the receiver. Its main structure is a spatula rotor driven by a gasoline engine, and a spatula is installed on the bottom of the cross in the middle of the rotor. The inclination direction of the spatula is consistent with the rotation direction of the rotor, and the V-belt is driven by the gasoline engine to rotate the spatula rotor. When operating, set fire first, hold the joystick, push the two forward together to move forward, and pull backward together to move backward. It can do 100-300m2 per hour on average, which can improve work efficiency by more than 30 times compared with manual troweling.
2）Hold the joystick tightly to keep the body balanced.
3）When the power trowel is working, the power trowel must be stabilized, and the direction must be adjusted in time when working on the floor to prevent the machine from losing control.
4）Coarse grinding first, then fine grinding. After the bottom grinding disc is coarsely ground, wait for the ground.
Suitable for removing the grinding disc during fine grinding and fine grinding with a spatula.
It is a rough and fine troweling machine for concrete surfaces. The machine-constructed surface is smoother and flatter than the manual-construction surface, which can greatly improve the compactness and wear resistance of the concrete surface, and increase the work efficiency by more than 10 times compared with manual operation. The floor power trowel can be widely used for lifting, troweling and troweling the concrete surface of high-standard workshops, warehouses, parking lots, squares, airports and framed buildings. It is the tool of choice in concrete construction.