How to operate a concrete cutter safely

How to operate a concrete cutter safely

Scope of application This regulation specifies the relevant rules for the safe operation of concrete cutters. This regulation is applicable to the operation of the company’s concrete pavement slitting machine (concrete cutter). The main content: The operator must carefully read the instruction manual for the operation of the concrete cutter, and use the control method of the machine in advance.
concrete cutter
Fuel oil should be added according to the rules before operation, and the random spare fuel should be packed in a special container and placed in a cool place. Before operation, check whether the bolts installed are tightened, and whether the slitting mechanism and transmission system are normal. Sewing machines that are not installed in accordance with the regulations shall not be used; 2. If the blade is found to be broken, it should be replaced, and the cutting edge should be sharpened if it is blunt or chipped.
concrete cutter
During operation, hands and feet are not allowed to approach rotating parts. The starter should be turned off when the operator is away from the machine. When the initiator and blade are running, it is not allowed to check and move the machine. When checking and moving the concrete cutter, be careful that the blade hurts your hands.
The engine must not run at overspeed. When the engine is overheated, it should be stopped after idling. During the operation of the concrete cutter, it is necessary to always pay attention to whether the machine is abnormal, and if there is abnormal vibration sound and loose parts, it should be stopped immediately for maintenance. The engine is not allowed to refuel under the following conditions.
concrete cutter Q480

Send Inquery