tmt bar bending machine
is a machine that precisely controls bending by industrial computer to replace manual bending. It mainly processes bar steel bars. It is a high-performance product specially researched for high-rise buildings, highways, high-speed railways and other large-scale projects. It is very important to master the correct operation method for the normal performance of the tmt bar bending machine.
Next, I will explain it to you in detail.
1. Production process
When the tmt bar bending machine is processing, first place the main bar on the main bar material, and then put the steel bar of the coil bar on the stirrup material rack, fix the bar through the bar, and fix it accordingly when the plate is moved. The preliminary welding of the CNC steel bar bending center can be carried out. The stirrups and the main bars should be cross welded and fixed, and the stirrups should be wound side by side for two consecutive circles, and then the normal welding operation can be carried out. It is necessary to rotate at the same time, so that the steel bars are continuously wound and welded on the main bar, and then the stirrups are cut off after the welding is terminated, and then the stirrups are cut after being wound side by side for two turns.
2. Safe operation
1. When operating the tmt bar bending machine, after the power is turned on, each single machine can be tested separately, and the operation of the lower bending center can be observed during the test run.
2. After the test run of the tmt bar bending machine, if there is no problem, it can be started online, but be careful not to approach or touch the equipment when it is turned on.
3. Shandong tmt bar bending machine direct supply reminds everyone that the emergency stop switch on the operating table of the tmt bar bending machine should be in a state that is easy to control, and the surrounding space should be large enough to facilitate the emergency stop of the staff and avoid injury.
1. When repairing the tmt bar bending machine, you will encounter the need to disassemble each part of the tmt bar bending machine. When disassembling, pay attention to the lifting balance of each part in order to better maintain it.
2. Shandong tmt bar bending machine direct supply manufacturers remind everyone to pay attention to whether the braking part will be damaged when assembling the tmt bar bending machine, and also need to be properly tightened when tightening, in order to better complete the assembly.
3. If you need to clean up the dismantled parts, take anti-rust measures for the parts, and ensure that there is sufficient space for the disassembly and assembly process to prevent the loss or damage of the parts.