Precautions for the use of rebar bending machine
Precautions for the use of rebar bending machine, one of rebar bending machine and steel bar processing machinery. The working mechanism is a horizontal working disc that rotates on the vertical axis. The steel bars are placed at the dotted position in the figure, and the supporting pins are fixed on the machine tool.
- During operation, insert one end of the steel bar that needs to be bent into the fixed gap of the turntable, and fix the other end against the machine body and press it by hand. Check the fixation of the rebar bending machine body and make sure that it is on the side that blocks the steel bar before starting.
- During the operation, it is strictly forbidden to replace the mandrel, change the angle and adjust the speed, and do not refuel or remove it.
- When bending steel bars, it is strictly forbidden to process more than the diameter, number and mechanical speed of steel bars specified by the rebar bending machine.
- When bending high-hardness or low-alloy steel bars, the limit diameter should be changed according to the regulations on the mechanical nameplate, and the corresponding core should be replaced.
