Explain the advantages of automatic three-axis thread rolling machine in detail

Product performance of three-axis thread rolling machine:

  1. Professional tube parts design, supported by equal triangles, can ensure the straightness, concentricity and verticality of the work when rolling.
  2. The dual-purpose of fixed and rolling is optional, and the main shaft drive can be controlled by frequency conversion, which can realize stepless speed regulation.
  3. The feed is controlled by hydraulic electric motor, which is easy to operate.
  4. The transmission gear is heat treated and ground, and the thread rolling machine has small transmission clearance, low noise and long-lasting durability.
  5. It is suitable for oil pipe joints, bicycles, auto parts, cooling pipe joints, air conditioner evaporators, condenser pipe fittings and other products.

thread rolling machine

The principle of automatic three-axis thread rolling machine

  1. The positive and negative wires are all fully automatic circuits. There is no need to manually press the button after each thread rolling is completed.
  2. The rib stripping part is opened on both sides, the operation is labor-saving, the accessories are not easy to be damaged, and the work efficiency is improved.
  3. Using the spiral angle head, the processing length can reach 120mm, the tooth shape precision is high, the thread head has no taper, the threading is labor-saving, and the thread rolling wheel can save 13.
  4. The positive and negative wire can be completed with one machine head, which is easy to adjust.
  5. It is 14 more efficient than ordinary machines.

thread rolling machine

If the connection is reversed, the coolant will not come out, or it will come out very little. The main motor can be ignored. It should be decided whether to rotate to the left or right according to the workpiece and the selection switch of the rolling die used on the panel. If the phase sequence is wrong, just put the random Just change the position of the two phase lines. If the hydraulic pump and the cooling water pump rotate in opposite directions, you can change the wire in the hydraulic motor junction box. Thread rolling machine is a special mechanical equipment for producing outer circumferential threads.
The features of the automatic three-axis thread rolling machine are: 1. The thread rolling machine tool integrates machinery, electrical appliances and hydraulics, and each system has advanced technology and stable performance. 2. During operation, just lightly click the open button, the thread rolling machine tool can automatically complete the whole process of clamping, feeding, rib stripping, diameter adjustment, thread rolling, returning and loosening of the workpiece to be processed. 3. The whole process of the thread rolling machine tool processing workpiece (wire length ≤ 200mm) takes about 35 seconds. 4. The thread rolling machine tool has a large processing range and can process various metal rod body threads in the range of M16–27. One machine is dual-purpose, integrating full diameter and thread rolling. Two processing procedures can be completed in one card installation, which can be used separately. The whole diameter can also be rolled separately, and one device can be used for two devices in the general processing method. 5. The thread processed by this thread rolling machine tool has a good thread profile and high precision, which fully meets the requirements of MT146.12–2002 standard.
thread rolling machine

Send Inquiry