Brief introduction of tube straightening machine

Brief introduction of tube straightening machine:

The structure of the tube straightening machine is that the angle of the straight wire die is adjusted by the high-speed rotor rotation to achieve the effect of straightening, and then the wire is fed forward through the wire feeding wheel. After reaching the required size, the wire touches the positioning key and pushes the runway forward by 5 mm. The upper punch presses the vertical wire cutter and cuts it immediately. The wire presses the open bearing through the pressure plate on the vertical wire cutter, and the wire automatically falls to the If you want to change the length of the wire carrier, move the positioning key.
tube straightening machine

Second, the use of tube straightening machine

The tube straightening machine has the characteristics of reasonable structure, convenient and safe operation and so on.
tube straightening machine

Functions and characteristics of tube straightening machine

There is no error in cutting the length of the steel bar;
Double head pulling type;
Until one meter of steel bars are adjusted and pulled out;
tube straightening machine
The construction wire adopts tungsten steel mold;
The product wire adopts the ball end die, and the transferred steel bar will not damage the surface.

Send Inquery