What is the ride on power float

How much do you know about ride on power float? In this paper, according to the different physical properties of each component of ride on power float machine, a finite element simulation is used to build a mechanical constitutive model for the ride on power float. When the machine contacts different aggregate particles, the variation rules of mechanical information are obtained and studied.

It is important that 0the following be read carefully in order that the operational performance of the ride-on power trowel be fully understood. Proper maintenance procedures will ensure long life and top performance of the unit.

SAFETY PRECAUTIONS

  • Always keep unauthorized, inexperienced, untrained people away from this ride on power float machine.
  • Rotating and moving parts will cause injury if contacted. Make sure guards are in place.Keep hands and feet away from moving parts.
  • Fuel the ride on power float machine only when the engine is stopped, using all necessary safetyprecautions.
  • The engine must always be stopped before attempting any repair or adjustments.Ignition key should be off.

Danger: Never operate the ride on power float machine in an explosive atmosphere, near combustible materials or where ventilation does not clear exhaust fumes. Repair fuel leaks immediately. Refer to your engine owner’s manual for more safety instructions.

ride on power float

  • Be careful not to come in contact with the muffler when the engine is hot, serious burnsmay result!
  • Always operate the machine in a seated position to maintain machine balance.
  • The transporter is designed for moving the unit around the job site only. It is notto be used for the ride-on power float unit off-site.
  • When starting the ride on power float machine, do not exceed thethrottle position as recommended. Ahigher setting could cause the centrifugal clutch to engage, turning the trowel blades.
  • Be careful with the ride-on power floataround stub pipes or other obstructions on the floor. Shouldthe machine catch, or hit such an obstruction, serious damage may result to the machine, or operator may be thrown from the ride on power float machine.
  • Excess surface water may result in sudden loss of control of steering.
  • Disconnect battery before attempting any electrical maintenance.
  • Ensure that the electrical safety switch, located either under the left foot pedal or underthe seat is engaged. Pressing the foot pedal down or sitting on the seat will engage thesafety switch. Removing your foot off the pedal or standing up will disengage the safety switch and stop the engine. The engine will not start unless the safety switch is engaged.

ride on power float

This safety feature must be used as designed.

Any evidence of failure to meet these conditions may result in a denial of the warranty claim.

Maintenance Record

Ride on power float machine has been assembled with care and will provide years of service.Preventative maintenance and routine service are essential to the long life of your ride on power float. After reading through this manual thoroughly, you will find that you can do some of the regular maintenance yourself. However, when in need of parts or major service, be sure to see your dealer. For your convenience we have provided this space to record relevant data about your ride on power float machine.

ride on power float

Send Inquery