The rebar threading machine cannot start the problem

①Empty open, reverse order always stop at closed;

②The power supply is out of phase;

③The thermal protector plays a protective role and the insurance is burned out;

④The wiring is off, and the transformer has been burned out.

⑤ Whether the control circuit contacts are damaged or have poor contact;

① Check the stop-start button and whether the disconnection is loose;

②Whether the contact of the button is good;

③ Check whether the limit contacts on the front of the equipment are in good condition, and whether the contacts, wires, and insurance are damaged (transformer).

In and out insurance

The rebar threading machine thread problem

The order of the gaskets in the rolling wheel is reversed

①The button switch is turned up

②Turn on the rebar threading machine to peel the skin counterclockwise, press the button on the back button to roll the thread clockwise, and then unwind the thread counterclockwise.