Maintenance method of steel bar straightening and cutting machine

If the steel bar straightening and cutting machine cannot complete the steel bar straightening operation, then you need to check the straightening system of the machine. There are several types of inspection items: the damage of the straightening roller, whether the straightening roller can be opened and closed normally, etc. If the machine cannot perform the straightening operation due to the above problems after inspection, then you only need to adjust the The faulty parts of the system can be replaced directly.

If the steel bar straightening and cutting machine cannot complete the cutting operation of the steel bar, then you need to check the cutting system of the machine. There are several types of inspection items: check the cutter, hammer, and hydraulic system of the cutting system to see which part is faulty, and then carry out targeted maintenance, and replace the severely damaged parts, of course, have to Add lubricating oil according to the situation.

The control system can be regarded as the “brain” of the steel bar straightening and cutting machine. If the system fails, the maintenance method is more complicated, but the user cannot give up maintenance because of the lack of understanding of the system. What you can still do is to check the line to see if the line is wrongly connected, missed, broken or exposed. If it is not caused by the above reasons after inspection, then you have to wait for Yongyi Tongfeng’s The manufacturer has come to repair the straightening and cutting machine.