If you want to reduce the maintenance cost of the laser screed machine, you must use the equipment reasonably. Without reasonable use and care, it will cause great damage to the equipment. Once the damage is formed, it will promote the generation of failures, so we must master it. The method of using the equipment, the suitable temperature, and the load used will have an impact on the failure generation. Let’s take a detailed look at how to reduce the maintenance cost of the laser screed machine.
How to reduce the maintenance cost of laser screed machine
- Pay attention to the applicable temperature:
During the use of the laser screed machine, firstly, it is necessary to prevent overload operation at low temperature, ensure the normal operation of the low-speed preheating stage, and make the machine reach the specified temperature before driving or working. Do not ignore it because there is no problem at that time. Important role; Second, it is necessary to prevent the machine from running at high temperature, immediately stop the machine to check if there is a problem, and eliminate the fault in time. In the usual work, pay attention to check the working condition of the cooling system.
- Reasonable working load:
The size and nature of the working load of the laser screed machine has an important influence on the wear process of the machine. Generally speaking, the wear of the parts increases proportionally with the increase of the load. When the load on the part is higher than the average design load, Its wear and tear will increase. In addition, when other conditions are the same, the stable load is smaller than the dynamic load, the wear is less, the failure is less, and the service life is shorter.
- Avoid impurities:
For laser screed machine working in harsh environments and complex conditions, first of all, high-quality, matching parts and lubricating oils and greases must be used to block the source of harmful impurities; secondly, the mechanical protection of the work site must be done well. work to ensure that the corresponding mechanism can work normally and prevent various impurities from entering the interior of the machine.
- Anti-corrosion:
In the use of laser screed machine, managers and operators should take effective measures to reduce the impact of chemical corrosion on the machinery according to the local weather conditions and air pollution at the time. Intrusion, the laser screed machine has strong flexibility and is very suitable for floor construction and construction in some terrain or places where the working environment is relatively attached.
