With the increasingly prominent use of secondary structure pouring pump equipment, as a kind of mechanical equipment, it is necessary to continuously improve its innovation ability in order to speed up the process of mechanization development.

What points need to be done in the process of secondary structure pouring pump construction:

1. First of all, the lubricating oil in the bearing seat should be replaced regularly, usually once every 6 months.

2. Secondly, keep no water traces on the motor to prevent the motor from getting wet, which will affect the use of the equipment.

4. For the secondary structure pouring pump with cooling water device, the cooling water should be connected before starting. When the secondary structure pouring pump is in normal operation, it can continue to be connected, or it can be stopped if the conditions do not allow it.

5. The operation of the pump when the outlet valve is closed is called the closed-pressure operation state. The closed-pressure operation time of the all-plastic pump or the plastic-lined pump should be shortened as much as possible. The normal temperature medium should not exceed 5 minutes, and the high temperature medium should not exceed 5 minutes. 2 minutes.

6. The secondary structure pouring pump cannot bear the weight of the inlet and outlet pipelines. The shorter the inlet pipeline, the better. The vertical height from the pump outlet to the valve should be as short as possible.

For the secondary structure pouring pump operation guide, the pouring pump manufacturer may want to tell you, but sometimes we will not fully grasp it. The above is to introduce some precautions for normal operation. It is always beneficial to learn more. I hope helpful for you.