Using the concrete pump bend, the workers work easily, the construction efficiency is high, and the boss is also happy. Now the secondary structure pouring wind has been opened on the construction site. The concrete pump bend needs to be simple to operate, but the operation method cannot be ignored.

Several aspects should be paid attention to when using concrete pump bend.

1. The choice of parking place is particular. The concrete pump bend should be parked on a flat and solid ground. Since the weight of the equipment is also several tons, it must not be placed on the soft ground to avoid tilting during the work.

2. The inspection work should be done well. Before using the concrete pump bend, check that all parts of the pump are complete, reliable and intact. In addition, it is often necessary to run the test pump empty, and use clean water to confirm the smoothness of the pipeline.

3. Master the operation skills to make the work easier. When operating the concrete pump bend, the operation must be correct and the pipeline is unobstructed to ensure the failure of the blocked pipe. To be fixed, there should not be too many bend or no two bend points to maintain a certain length of the pipe. Pay close attention to the dynamics of the machine when it is in operation, detect errors in time, and avoid failures.

4. After the operation, flush the pump, hopper and pipeline, and then ensure that the power is cut off.

The above is a few aspects that you know about the use of pressure in secondary structure pouring. I hope it will help you. If you have any questions about the concrete pump bend, you can call us for consultation.